(2-4 mm)
Polyaspartic based flooring system.
Denspartic Topfloor with a smooth structure is ideal for areas, which are subject to heavy mechanical and chemical wear, with high demands for being free of dust, such as work rooms, storage rooms, laboratories, etc. Denspartic Topfloor is also suitable for renovation of older Denspartic floorings.
Aesthetically Pleasing, Silkmat Surface
Very Good Chemical Resistance
Fast Installation
Low Maintenance Cost
Non Slip Finish if required
UV Resistant
Easy to Clean & Sterilize
Denspartic Topfloor floorings are flexible with excellent wearability, impact and chemical resistance. Denspartic Topfloor is easy to clean and maintain in a hygienic condition. Typical areas of use are workshops, warehouses, exhibition areas, laboratories, canteens, bathroom facilities, offices and corridors. Denspartic Topfloor is used also to refresh or renovate old polyaspartic floors. The very fast curing of Denspartic floorings means, that an eventual production stop is minimized while installing the floor.
Work rooms
Storage rooms
Laboratories
| LAYER | PRODUCT | CONSUMPTION (kg/m²) | INTERMEDIATE | THICKNESS (mm) | APPLICATION |
|---|---|---|---|---|---|
| Primer | Denspartic AP | 0.3 - 0.5 | sand scatter 0.3 - 0.8 or 0.7 - 1.2 for antislip properties | Min 0.3 | Rubber squegee and paint roller |
| Top coat | Denspartic ACS | 2.5 - 3.0 | None | 2.0 - 4.0 | Notched rubber squegee and spike roller |
Properties
Value
Abrasion resistance
50 mg / 1000 cycles (Taber Abrader)
Anti-slip according to DIN 51130
R9 – R13
Applied thickness
2,0 - 4.0 mm
Bond strength
>1.5 MPa
Compressive strength
40 MPa
Food Contact
No contamination
Fully cured at 20°C
2 hours
Hardness
SHORE D 40
Reaction to fire
Bfl-s1
Temperature resistance
Up to 80°C
Thermal conductivity
< 0,4 W/m·K
Thermal expansion coefficient
<40 ppm
Water Permeability
Nil – Karsten test (impermeable)
Dencoat India
2026-02-11
Dencoat India, a leading player in building materials and surface coatings, has just introduced a new type of waterproofing membrane that promises to redefine standards for moisture and water intrusio...
READ MORE
Nordzucker, Denmark
Dencoat Danmark
2026-02-11
Being one of two sugar factories in Denmark, Nordsucker Nakskov was once the largest sugar factory in Northern Europe. Built in1882, it could process 300 tonnes of sugar beet per day. This made the f...
READ MORE
Diesel Technic, Dubai
Dencoat India
2025-02-28
DUBAI, EMIRATES OF DUBAI, UNITED ARAB EMIRATES, February 20, 2025 Duphill Technical Solutions LLC has successfully completed the flooring project for Diesel Technic’s cutting-edge warehousing f...
READ MORE
