(6-8 mm)
Dencrete MF is a self levelling cementitious polyurethane screed based on natural bio-polyol without solvents or any VOC. It provides excellent resistance to aggressive chemicals, heavy impact and temperatures. It is dense and impervious and provides an anti slip surface suitable for dry and wet areas where a joint free finish and a robust long-lived floor is required.
Seamless and Hygienic Finish
Resistant to Extreme Temperatures
Excellent Chemical Resistance
Clean & Hygienic
High Abrasion Resistance
No VOC & Solvent Free
Anti Slip Finish Available
Low Odour during Installation
To provide a heavy duty floor finish with exceptional temperature and chemical resistance. Typical uses are wet and dry process areas with hot liquid spillage, hot water cleaning, heavy traffic, impact and chemical exposure.
Industrial kitchens
Loading areas
Dairies
Pharmaceuticals
Food & Beverage
Cold storage, Chiller & Freezer
Meat, Fish & Poultry processing
Chemical plant processing
| LAYER | PRODUCT | CONSUMPTION (kg/m²) | INTERMEDIATE | THICKNESS (mm) | APPLICATION |
|---|---|---|---|---|---|
| Primer | Dencrete Primer | 0.3 - 0.5 | Light sand scatter 0.3 - 0.8mm on wet surface | Min 0.3 | Rubber squegee and paint roller |
| Wear Layer | Dencrete MF | 12.0 - 16.0 | Full broadcast aggregate 0.7 - 1.2 mm on wet surface | 6.0 - 8.0 | Notched rubber squegee and spike roller |
| Top coat | Dencrete TC | 1.0 - 2.0 | None | 0.7 - 1.5 | Rubber squegee and paint roller |
Properties
Value
Fire class EN 13501-1
Bfl-s1
Fully cured at 20°C
3 days
Applied thickness
6 - 8 mm
Water Permeability
Nil – Karsten test (impermeable)
Hardness
SHORE D 90
Compressive strength
55 MPa
Reaction to fire
Bfl-s1
Bond strength
>1.5 MPa
Temperature resistance
Up to 100°C at 8 mm
Thermal expansion coefficient
< 25 ppm
Abrasion resistance
20 mg / 1000 cycles (Taber Abrader)
Thermal conductivity
< 1.5 W/m·K
Anti-slip according to DIN 51130
R9 – R13
Food Contact
No contamination
VOC according to EN 13419
Pass
Chemical resistance
See Dencrete resistance list
Compressive strenght
55 N/mm2
Flexural strenght
22 N/mm2
Tensile strenght
19 N/mm2
Dencoat India
2026-02-11
Dencoat India, a leading player in building materials and surface coatings, has just introduced a new type of waterproofing membrane that promises to redefine standards for moisture and water intrusio...
READ MORE
Nordzucker, Denmark
Dencoat Danmark
2026-02-11
Being one of two sugar factories in Denmark, Nordsucker Nakskov was once the largest sugar factory in Northern Europe. Built in1882, it could process 300 tonnes of sugar beet per day. This made the f...
READ MORE
Diesel Technic, Dubai
Dencoat India
2025-02-28
DUBAI, EMIRATES OF DUBAI, UNITED ARAB EMIRATES, February 20, 2025 Duphill Technical Solutions LLC has successfully completed the flooring project for Diesel Technic’s cutting-edge warehousing f...
READ MORE
