× Home Projects News Get In Touch Log In

Dencryl Standard

(3-4 mm)

PMMA based flooring system.
Recommended for areas, which are subject to moderate mechanical or chemical wear with high hygienic demands, such as food industry, wash rooms, and other areas, where an anti-slip surface and easily cleanable floor is required.






 

Benefits

  • Aesthetically Pleasing, Silkmat Surface
  • Very Good Chemical Resistance
  • Weatherproof & UV Resistant
  • Fast Installation
  • Curing Down to -30°C
  • Low Maintenance Cost
  • Non Slip Finish if required
  • Easy to Clean & Sterilize

Applications

For all types of medium load industrial floors, in combination with high demands to hygiene and cleanability. Dencryl Standard floorings are flexible with excellent wearability, impact and chemical resistance. Dencryl Standard is easy to clean and maintain in a hygienic condition. The very fast curing of Dencryl floorings means, that eventual production stop is minimized while installing the floor.

Scope of use

  • Food industry
  • Wet areas with anti-slip requirements
  • Wash & bath rooms

Application conditions

  • Temperature -30ºC to 30ºC, best 15 to 25ºC, max. moisture content in the concrete subfloor 5% by weight.

Appearance

  • Dencryl Standard is a non-slip multicoloured floor with a silkmatt finish.

Temperature Resistance

  • Dencryl Standard is resistant to temperature cycles up to 80°C. Extended periods at these temperatures and above will make material susceptible to chemical attack and abrasion wear.

Life Expectancy

  • 10 - 15 years

Colours

  • See separate color chart.
Dencryl Standard
Actalia
HACCP
CE

System Build-up

LAYER PRODUCT CONSUMPTION (kg/m²) INTERMEDIATE THICKNESS (mm) APPLICATION
Primer Dencryl P11 0.3 - 0.5 Scatter quartz 0.7 - 1.2 mm on wet surface Min 0.3 Rubber squegee and paintroller
Intermediate layer Dencryl B24 + Floor Filler 1.5 + 4.0 Full broadcast of Color Quartz on wet surface 3.0 - 4.0 Notched rubber squegee and trowel
Topcoat Dencryl S32 0,7 - 1.2 None 0.7 - 1.2 Rubber squegee and short haired paint roller

Technical Data

Properties

Value

Fully cured at 20°C

2 hours

Applied thickness

2 - 4 mm

Water Permeability

Nil – Karsten test (impermeable)

Hardness

SHORE D 40

Compressive strength

60 MPa

Reaction to fire

Dfl-s1

Bond strength

>1.5 MPa

Temperature resistance

Up to 80°C at 4 mm

Thermal expansion coefficient

<40 ppm

Abrasion resistance

50 mg / 1000 cycles (Taber Abrader)

Thermal conductivity

< 0,4 W/m·K

Anti-slip according to DIN 51130

R9 – R13

Food Contact

No contamination

Colours

Dencoat
Tomorrows Floors Today

Stay updated

Latest Projects

Automotive & Workshops Diesel Technic, Dubai
Dencoat India 2025-02-28

6.000 m2 Dencrete CC at Diesel Technic in Dubai

DUBAI, EMIRATES OF DUBAI, UNITED ARAB EMIRATES, February 20, 2025  Duphill Technical Solutions LLC has successfully completed the flooring project for Diesel Technic’s cutting-edge warehousing f...

READ MORE
Dencoat India 2025-02-12

Dencoat India crunches 11.500m2 of Dencrete MD at Haldiram Snacks Food

Haldiram Snacks Food, a part of the Indian FMCG conglomerate within fast food, confectionary, dessert and snacks, is the largest snack and sweet brand in India, and enjoys an excellent reputation for...

READ MORE
Engineering & Manufacturing

Dabur, Pithampur India

Dencoat India 2025-02-13

15.000m2 of Herbal joy at Dabur, India

Dabur, with headquarters in Ghaziabad Uttar Pradesh, is one of the oldest and most trusted names in Ayurveda, with a legacy spanning over 135 years. Known for iconic products like Dabur Chyawanpr...

READ MORE