(4-6 mm)
PMMA based flooring system.
Recommended for industrial areas, which are subject to very high mechanical or chemical wear with high hygienic demands, such as heavy industry, industrial kitchens, bakeries, slaughter houses, food industry, refrigerator areas, and other areas, where an anti-slip surface and easily cleanable floor is required.
Aesthetically Pleasing, Silkmat Surface
Very Good Chemical Resistance
Weatherproof & UV Resistant
Fast Installation
Curing Down to -30°C
Low Maintenance Cost
Non Slip Finish if required
Easy to Clean & Sterilize
For all types of medium to heavy load industrial floors, in combination with high demands to hygiene and cleanability. Dencryl Industry floorings are flexible with a high wearability, impact and chemical resistance. Dencryl Industry is easy to clean and maintain in a hygienic condition. The very fast curing of Dencryl floorings means, that eventual production stop is minimized while installing the floor.
Heavy industry
Industrial kitchens
Food industry
| LAYER | PRODUCT | CONSUMPTION (kg/m²) | INTERMEDIATE | THICKNESS (mm) | APPLICATION |
|---|---|---|---|---|---|
| Primer | Dencryl P11 | 0.3 - 0.5 | Scatter Quartz 0.7 - 1.2 mm on wet surface | Min 0.3 | Rubber squegee and paintroller |
| Wear layer | Dencryl B24 + Color Quartz | 2.5 + 8.0 | Scatter Color Quartz on wet surface for anti slip purpuse | 4.0 - 6.0 | Notched metal squegee and trowel |
| Topcoat | Dencryl S32 | 0,7 - 1.2 | None | 0.7 - 1.2 | Rubber squegee and paint roller |
Properties
Value
Fully cured at 20°C
2 hours
Applied thickness
4 - 6 mm
Water Permeability
Nil – Karsten test (impermeable)
Hardness
SHORE D 80
Compressive strength
85 MPa
Reaction to fire
Dfl-s1
Temperature resistance
Up to 80°C at 6 mm
Thermal expansion coefficient
<40 ppm
Abrasion resistance
50 mg / 1000 cycles (Taber Abrader)
Anti-slip according to DIN 51130
R9 – R13
Food Contact
No contamination
Dencoat India
2026-02-11
Dencoat India, a leading player in building materials and surface coatings, has just introduced a new type of waterproofing membrane that promises to redefine standards for moisture and water intrusio...
READ MORE
Nordzucker, Denmark
Dencoat Danmark
2026-02-11
Being one of two sugar factories in Denmark, Nordsucker Nakskov was once the largest sugar factory in Northern Europe. Built in1882, it could process 300 tonnes of sugar beet per day. This made the f...
READ MORE
Diesel Technic, Dubai
Dencoat India
2025-02-28
DUBAI, EMIRATES OF DUBAI, UNITED ARAB EMIRATES, February 20, 2025 Duphill Technical Solutions LLC has successfully completed the flooring project for Diesel Technic’s cutting-edge warehousing f...
READ MORE
