When medical
hygiene requirements are
imposed on your floor
Medicines · Laboratories · Clean Rooms · Botanical · Medicinal Chemicals · Perfumes & Toiletries · Soaps & Detergents
Laboratory and drug manufacturing facilities are expected to start clean and stay clean. The floors need to be cleaned, sanitised and disinfected thoroughly every day, with the floor revealed once again as new - also after another 5000 such operations!
Many drug producers have learned the importance of choosing the right floor for chemicals. Unfortunately some of them were mistaken the first time and chose another solution. Wish that we had been around at that time!
| System Name | Thickness | Typical Areas of Use | Surface | Chemical Resistance | Mechanical Resistant After | Max Load | Max Heat Resistance | Application Temperature |
|---|---|---|---|---|---|---|---|---|
| Dencryl™ Topfloor | 2-4 mm | Is ideal for areas, which are subject to heavy mechanical and chemical wear, with high demands for being free of dust, such as work rooms, storage rooms, laboratories, etc. Dencryl™ Topfloor is also suitable for renovation of older Dencryl™ floorings. | Smooth / Partially Non-Slip | Very Good | 2 hours | 40 Mpa | Max 80ºC | -30 to 30ºC |
| Dencryl™ Standard | 3-4 mm | Used in areas, which are subject to moderate mechanical or chemical wear with high hygienic demands, such as food industry, wash rooms, and other areas, where an anti-slip surface and easily cleanable floor is required. | Non-Slip/Partially Non-Slip | Very Good | 2 hours | 60 Mpa | Max 80ºC | -30 to 30ºC |
| Dencryl™ Industry | 4-6 mm | Used in industrial areas, which are subject to very high mechanical or chemical wear with high hygienic demands, such as heavy industry, industrial kitchens, bakeries, slaughter houses, food industry, refrigerator areas, and other areas, where an anti-slip surface and easily cleanable floor is required. | Non-Slip / Partially Non-Slip | Very Good | 2 hours | 85 Mpa | Max 80ºC | -30 to 30ºC |
| System Name | Thickness | Typical Areas of Use | Surface | Chemical Resistance | Mechanical Resistant After | Max Load | Max Heat Resistance | Application Temperature |
|---|---|---|---|---|---|---|---|---|
| Dencrete™ TC | 1-2 mm | Used in industrial areas, which are subject to low mechanical or chemical wear, where antislip properties are required. | Smooth / Partially Non Slip | Excellent | 3-5 days | 50 Mpa | Max 80ºC | 10 to 30ºC |
| Dencrete™ SL | 2-3 mm | Used in areas, which are subject to light to medium mechanical or chemical wear. With high hygienic demands, such as industrial kitchens, bakeries, slaughter houses, dairies, breweries and generally in production industry and other areas. | Smooth / Non-Slip | Excellent | 3-5 days | 59 Mpa | Max 80ºC | 10 to 30ºC |
| Dencrete™ MD | 3-5 mm | Used in areas, which are subject to heavy mechanical or chemical wear. With high hygienic demands, such as industrial kitchens, bakeries, slaughterhouses, dairies, breweries and generally in production industry and other areas. | Smooth / Partially Non Slip | Excellent | 3-5 days | 59 Mpa | Max 90ºC | 10 to 30ºC |
| Dencrete™ MF | 6-8 mm | Used in areas, which are subject to extremely heavy mechanical or high chemical charges, with hygienic demands, such as dairies, bakeries, breweries, slaughter houses, smokehouses, ovens and cold stores, and generally in the food industry, where antislip properties are required. | Smooth / Non-Slip | Excellent | 3-5 days | 55 Mpa | Max 100ºC | 10 to 30ºC |
| Dencrete™ HF | 9-12mm | Used in areas, which are subject to extremely heavy mechanical or high chemical charges, with hygienic demands, such as dairies, bakeries, breweries, slaughter houses, smokehouses, ovens and cold stores, and generally in the food industry, where steam cleaning is required. | Non-Slip/Partially Non-Slip | Excellent | 3-5 days | 55 Mpa | Max 130ºC | 10 to 30ºC |
| System Name | Thickness | Typical Areas of Use | Surface | Chemical Resistance | Mechanical Resistant After | Max Load | Max Heat Resistance | Application Temperature |
|---|---|---|---|---|---|---|---|---|
| Denpox™ Topcoat | 0.5 mm | Is ideal to provide a light to medium duty, easy to clean, chemical resistant floor coating. A non slip finish can be produced by incorporation of aggregates between coats. Typical uses are process, manufacturing, packaging and warehousing areas subjected to heavy foot and pallet truck traffic | Smooth / Partially Non-Slip | Good | 7 days | 40 Mpa | Max 70ºC | 10 to 30ºC |
| Denpox™ Topfloor | 2-4 mm | Used in areas where ease of cleaning, dust free surfaces and durability are prioritised such as workshops, storage areas, exhibition areas, laboratories, canteens, pedestrian areas and bathing and changing areas. Also used in the refurbishment of older Epofloor coverings. | Smooth / Partially Non-Slip | Very Good | 7 days | 40 Mpa | Max 70ºC | 10 to 30ºC |
| Denpox™ Compact | 3-5 mm | Used in industrial areas, which are subject to heavy mechanical and chemical wear, with high hygienic demands. At the same time the floor is easily cleanable and therefore very suitable for industrial production, chemical production, slaughterhouses, food industry, breweries, etc. | Smooth / Partially Non Slip | Very Good | 7 days | 40 Mpa | Max 70ºC | 10 to 30ºC |
| Denpox™ Industry | 4-6 mm | Used for industrial environments, which are subject to heavy mechanical and chemical wear and have the need for high hygienic demands. The floor is easy to maintain, and is used for industrial production, chemical industry, slaughter houses and other food industries, breweries, etc. | Non Slip / Partially Non Slip | Very Good | 7 days | 40 Mpa | Max 70ºC | 10 to 30ºC |
| Denpox™ Terrazzo | 6-15 mm | Is ideal for areas, where massive decorative surfaces are wanted. The floor is very easy to maintain and easily cleanable and makes the working environments presentable.It is being recommended for usage in for instance airport terminals, supermarkets, exhibition rooms, show rooms, etc | Smooth | Very Good | 7 days | 40 Mpa | Max 70ºC | 10 to 30ºC |
| System Name | Thickness | Typical Areas of Use | Surface | Chemical Resistance | Mechanical Resistant After | Max Load | Max Heat Resistance | Application Temperature |
|---|---|---|---|---|---|---|---|---|
| Denpur™ SL | 3-4 mm | Used in industrial areas, which are subject to normal traffic. The floor has a high wear resistance, high Chemical Resistance and medium resistance to shocks. The floor is suitable for dry areas such as laboratories, corridor areas, electronic companies and hospitals, etc. | Smooth | Excellent | 3-5 days | 80 Mpa | Max 80ºC | 10 to 30ºC |
Highlights
Smooth-Or-Non-Slip
The practical requirements connected with industrial floors are many. One situation can demand a very smooth surface while another calls for the highest possible nonslip qualities. Dencoat™ can supply floors, which fulfill all these requirements, from one extreme to the other, so that the working day is safe - and smooth..
Complete Watertight
Any liquids which may come from the production process or which may be used in connection with the cleaning of the floor, must be drained off quickly and effectively. This requires a floor which is absolutely watertight and which can be laid with seamless drainage. Dencoat™ is the solution...
Hygienic
In many areas - from the food industry to hightech companies - hygiene is a high priority. Here, floor coverings are, in every respect, the foundation. Dencoat™ flooring is very often chosen on the basis of its many an excellent hygienic qualities. With Dencoat™ you don't need a plate - you can eat directly from the floor.
Resistant To Chemicals
In those industries where chemicals are used, a floor must live up to very stringent demands. It must be acid and base proof and must be able to be cleaned thoroughly. Dencoat™ flooring is made from a range of man.made materials which can be combined so that they effectively fulfill the individual customer's requirements with regard to chemical resistance. In short: Dencoat™ has the floor that lives up to all your expectations...
Heat Resistant
A floor must also be able to withstand heat-producing production processes or intensive cleaning at high temperatures. Dencoat™ flooring can be supplied in an extremely heat-resistant version which can withstand very high temperatures..
Chock Resistant
Generally, the thicker the floor, the more resistant the floor is to heavy and sharp objects, impacts, shocks and dropped objects. Dencoat™ delivers floor solutions to everything from school building to offices, shopping and sports centers to heavy industry with heavy wear and tough industrial treatment.
Extremely Hard-Wearing
An industrial floor must be able to put up with frequent traffic. The same applies to floors in shops, large kitchens, bakeries, butchers, etc. A Dencoat™ floor is a solid foundation everywhere and is extremely hard-wearing. A worthwhile, long-term investment, which will ensure solid ground under your feet for many years to come...
Withstands Heavy Loads
Apart from intensive use, an industrial floor must also, in many industries, be able to withstand severe mechanical influences. The various man-made materials, which are present in a Dencoat™ floor, are combined to produce an underlay, which can withstand even the toughest industrial treatment. With a Dencoat™ floor, everything is as easy as winking...
Office Chairs
In many offices, there’s a fair amount of rolling back and forth over the course of a day. Dencoat™ floors have been tested to resist this traffic so that the beautiful office floors aren’t compromised by wear and tear.
Comfort
With the nice soft coating of the Dencoat™ Comfort series, two important functions are achieved. Firstly, they absorb hard shocks so that your back isn’t unnecessarily burdened. Secondly, they are soundproof so that the noise of steps doesn’t resound throughout the building. That they look great too is just an added bonus!
Soundproof
Acoustics play an important part in how people thrive indoors. The type of flooring is a significant factor in the amount of sound reflected in a room, concrete floors being the most notorious culprits. Dencoat™ flooring solutions that carry this brand absorb sound, contributing to the creation of a pleasant indoor environment.
Fire Tested
All Dencoat™ floors have been tested in accordance with international standards so that you, as the architect or builder, can choose a Dencoat™ floor that lives up to the demands of each individual construction. In many cases the fire requirements are exceeded.
Colour
Dencoat™ floors can be delivered in any colour so that you, as the architect or builder, can let the floor contribute to the overall design of the building. The individual Dencoat™ floor types come in a range of standard colours but can be delivered in any specific hue of your choosing.
Free Of Smells And Voc
Most Dencoat™ flooring solutions can be made with raw materials that do not contain volatile organic compounds. This is not just an advantage as the first jointless floor is laid out, but also in relation to future maintenance and repairs. Thus, VOC free flooring solutions are the obvious choice for offices, halls, and places where food is being processed.
Fast Curing
In many modern production units, down time is an important issue. Delays are costly and flooring repairs must be done without disturbing production. Dencoat™ can provide flooring solutions with rapid curing properties. After only two hours of curing, the surface is ready for further activities.
Ready in no time -
to last a lifetime...
Dencoat Spain
